OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E58

Alternative Fuel Random/Multiple Cylinder Misfire Detected

P2E58 is the collective misfire code for running on the second fuel, mostly CNG or LPG: misfires are counted while gas is burned, but no single cylinder can be blamed, or several each carry a large share. CARB treats a bi-fuel car as alternate-fueled only while it runs on gas and asks for the same misfire monitor as on petrol; EPA likewise requires converters to keep OBD working on the conversion fuel. No carmaker documents P2E58 openly; Honda's Civic CNG and Roush propane trucks log gas-mode misfire with the ordinary P03xx codes. A GM patent checks both fuels: misfire on gas only points to the gas side, on both fuels to ignition. Likely culprits are an iced or poorly heated regulator or vaporiser, a clogged filter, low gas pressure or a lean mixture. One-cylinder faults are P2E59 to P2E60.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 58

Possible causes

  • Gas pressure regulator or LPG vaporiser iced up or not heated enough (low coolant flow, moisture in the gas) high
  • Too little gas pressure at the rail – clogged gas filter, nearly empty tank or weak regulator medium
  • Worn plugs or weak coils on several cylinders that cope with petrol but not with the harder-to-ignite gas mixture medium
  • Lean gas mixture from an intake air leak or wrong gas-system calibration medium

Symptoms

  • Rough running or jerking only while the engine runs on gas
  • Bi-fuel vehicle switches back to petrol on its own
  • Check engine light on or flashing, gas-mode indicator may flash

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E58

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication