OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E56

Exhaust Pressure Sensor C Circuit Low

P2E56 means the signal of exhaust pressure sensor C stays under the lowest voltage a working sensor can produce. Analogue exhaust pressure sensors return a share of their 5 V reference; Ford's petrol transfer function for sensor A puts 49 kPa at 0.3 V and flags anything under 0.21 V for 5 s, while its 2023 diesels use 0.1 V for 2 s. No manufacturer publicly documents P2E56. A signal wire shorted to ground, a lost 5 V reference or a sensor with a failed output stage are the usual reasons; if several sensors on the same reference set low codes at once, the reference or the module is the better suspect. Functions that use the value, such as EGR or turbocharger control, then rely on substitute values, so power may be limited. The high-side code is P2E57, sensor A's low code P0472.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 56

Possible causes

  • Signal wire of sensor C shorted to ground high
  • 5 V reference open or pulled down by another sensor medium
  • Sensor C output stage failed medium

Symptoms

  • MIL on
  • Possible loss of power from substitute values
  • Further low codes of sensors sharing the reference

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2E56

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication