OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E55

Exhaust Pressure Sensor C Circuit Range/Performance

P2E55 is the plausibility test of exhaust pressure sensor C: the voltage is in range, but the pressure does not suit the operating state. CARB wants such rationality faults stored apart from circuit faults. No maker documents P2E55; Ford's 2023 diesel summary shows the pattern for sensor A. With the engine stopped for at least 10 s the reading may differ from ambient pressure by no more than 15 kPa; while driving it is set against a model and may not exceed it by 500 kPa or fall 100 kPa below it. A Ford patent (US7779633) computes the pressure ahead of the turbine; a Bosch patent checks two sensors on either side of a flow restriction against a modelled pressure drop. FCA warns that real back pressure from a clogged particulate filter sets the code on Cummins diesels, so check the exhaust first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 55

Possible causes

  • Real back pressure from a clogged particulate filter or catalyst high
  • Sooted or cracked sensing tube to sensor C medium
  • Sensor C offset drifted or stuck mid-range medium
  • Exhaust leak near the measuring point low

Symptoms

  • MIL, often without noticeable driveability change
  • Particulate filter or EGR codes alongside
  • Reduced power if the pressure is really too high

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E55

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication