OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E54

Exhaust Pressure Sensor C Circuit

P2E54 is the general circuit fault of a third exhaust pressure sensor, C. Its position is set by the manufacturer; engines can carry several such sensors, as in a GE patent with one pressure sensor in each of two exhaust manifolds. No manufacturer publicly documents P2E54; Ford's 2023 diesels and its EcoBoost petrol engines use sensor A only. For that sensor Ford's diesel summary uses the general circuit code when the digital SENT sensor reports an error status or delivers raw data above a limit, while lost communication goes to U0691; for sensor C that is U069F. CARB's heavy-duty rule lists exhaust pressure sensors among monitored input components. Expect the MIL and, depending on use, limited boost or EGR. Low and High are P2E56 and P2E57.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 54

Possible causes

  • Exhaust pressure sensor C failed internally high
  • Wiring near the exhaust damaged by heat or chafing medium
  • Corroded or loose connector at sensor C medium

Symptoms

  • MIL on
  • Reduced power if boost or EGR control falls back to substitute values
  • Other exhaust or EGR monitors may not run

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2E54

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication