OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E53

Battery Charger Coupler Temperature D Too High

P2E53 means measuring point D in the charging inlet reports a contact that is too hot, and charging is throttled or halted. Ford documents this exact code in SSM 55080: on Mustang Mach-E built up to 25 June 2023, E-Transit 2022-2025 and F-150 Lightning 2022-2023, DC fast charging can stop with P2E53:27 and/or P0EEE:27 in the SOBDM. The 27 is the J2012 subtype for a signal changing faster than allowed. Ford blames SOBDM software, says a new charge port will not help, keeps AC charging available and expected a fix in Q3 2026. That differs from SSM 51866, where P0E5F at 48 A AC led to a new charge port. A Ford patent (US10377264) describes the port sensor feeding the charger, which derates or shuts down above a threshold. A DOE report cites 90 to 100 °C contact limits. Circuit faults of sensor D are P2E4F to P2E52.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 53

Possible causes

  • SOBDM software misjudging DC fast-charge heating (Ford SSM 55080) high
  • Worn or contaminated DC pins in the station plug or the inlet medium
  • Very high charging current in hot weather medium
  • Heat-damaged inlet contacts needing a new charge port low

Symptoms

  • DC fast charging stops at level 3 stations
  • AC charging at home or level 2 still works
  • Charging power reduced during fast charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E53

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication