P2E51
Battery Charger Coupler Temperature Sensor D Circuit Low
P2E51 reports a sensor D voltage below the valid band. TE Connectivity lists thermistors, thermocouples and resistance temperature detectors as candidate elements for inlet sensing (US10960781), and the patent also explains the stakes: contact resistance heats the inlet at high current and could melt parts or start a fire if nobody watches. With an NTC thermistor a low signal suggests a contact far too hot to be real; with a resistance detector such as a PT1000 it suggests a pin colder than the climate allows. Either way the most common physical cause is a short to ground or moisture across the sensor leads. The only public trace of a sensor D is Ford's SSM 55080 on P2E53 for three of its electric models; P2E51 itself appears in no maker's published documents. High signal is P2E52, real overheating P2E53.
Possible causes
- Sensor D signal wire shorted to ground high
- Moisture or corrosion in the inlet harness connector medium
- Temperature element D shorted internally medium
- Measuring input of the evaluating module defective low
Symptoms
- DC fast charging refused
- Charging warning message
- Inlet temperature reading implausible in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E51
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.