P2E4F
Battery Charger Coupler Temperature Sensor D Circuit
P2E4F is the general circuit fault of the fourth inlet temperature sensor, used when the wiring is clearly wrong but not classed as low, high or implausible; the D row has no intermittent code either. Ford is the one maker whose public papers show a sensor D in use: SSM 55080 names P2E53, the overheating verdict for point D, stored in the secondary OBD module (SOBDM) of the Mustang Mach-E, E-Transit and F-150 Lightning, so that module reads sensor D. Ford does not publish P2E4F or say which pin D watches. A fourth point makes sense because, as TE patent US11329436 puts it, each DC contact above 200 A needs its own monitoring and a 90 °C contact must be reported within 30 s. On the smart with 22 kW charger, Mercedes traced inlet sensor codes to loose low-voltage plugs at the charger (LI54.10-P-067823).
Possible causes
- Low-voltage connector between inlet harness and evaluating module loose (smart for sensor A) high
- Sensor D wiring chafed or broken medium
- Temperature element D failed (normally replaced with the inlet) medium
- Measuring input in the SOBDM or charger defective low
Symptoms
- DC fast charging refused or limited
- Charging warning in the cluster
- Fault may only show with a warm or cold inlet
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E4F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.