P2E4A
Battery Charger Coupler Temperature Sensor C Circuit
P2E4A is the general electrical fault of a third temperature measuring point in the charging inlet, logged when the module sees a defective circuit but does not sort it into low, high or implausible. Unlike sensors A and B, the C row has no intermittent code of its own. Why a third sensor exists: a TE Connectivity patent (US11329436) recalls that above 200 A each DC contact needs its own permanent temperature watch, and inlets such as Sailtran's CCS2 add one at the L1 pin. Which contact C watches is up to the maker, and none documents P2E4A publicly. A Phoenix Contact patent (US10256579) shows that one sensor input may even be a series chain of PTC elements on several pins, so one broken lead silences the whole chain. CARB expects charger faults that block or slow plug-in hybrid charging to be detected.
Possible causes
- Sensor lead or crimp between inlet and evaluating module broken high
- Low-voltage connector of the inlet harness loose or corroded medium
- Temperature element C (or one element of a PTC chain) failed inside the inlet medium
- Measuring input in the charger or charge control module defective low
Symptoms
- Charging refused or only possible at reduced power
- Charging system warning in the cluster or the app
- Charge indicator at the inlet signals a fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E4A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.