P2E49
Hybrid/EV Electronics Coolant Pump B Stuck/Stalled
P2E49 reports that electronics coolant pump B is powered and commanded, but its rotor does not turn or comes to a standstill. Mitsubishi's 2022 Outlander PHEV shows such a test for its electric water pump: with more than 9 V supply the PHEV-ECU sets P10D9 once the reported speed stays under 100 rpm for 0.5 s, against about 500 rpm when healthy. A GM patent (US9599011) checks electric coolant pumps by comparing the measured current with the current expected for the operating point; a blocked rotor shows up as a mismatch. Ford's 2024 summary names the matching failure type actuator stuck (71). No manufacturer publicly documents P2E49. Seized bearings, debris after repairs, frozen coolant and burnt windings are usual causes. Underspeed is P2E47, pump A's stall code P2C68.
Possible causes
- Seized bearing or failed pump B motor high
- Debris or sealant residue jamming the impeller medium
- Frozen coolant due to insufficient antifreeze low
- Supply or ground lost under load low
Symptoms
- MIL and hybrid or drive system warning
- Rapid temperature rise in inverter or charger
- Strong power reduction or charging stops
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2E49
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.