P2E48
Hybrid/EV Electronics Coolant Pump B Overspeed
With P2E48 the controller sees electronics coolant pump B turning faster than commanded, without the separate dry-run test (P2E46) having fired. The usual reason is lost load, since a centrifugal pump accelerates when its impeller gets less liquid, whether from a low level, a collapsed suction hose, partial air or an impeller slipping on its shaft. A Continental patent for electric fuel pumps (US20120245819) compares pump current with voltage or speed to spot leakage or dry running without a pressure sensor. Mercedes' bulletin on pump A's P2B2A7A in the 167 series links excessive speed to leakage or a failed seal. Ford's 2024 summary combines overspeed and dry run in one fault type (B1). No manufacturer publicly documents P2E48. A false speed signal is rarer.
Possible causes
- Low level or residual air in the electronics loop high
- Collapsed or kinked hose on the pump inlet side medium
- Impeller slipping on the pump shaft low
- Implausible speed feedback from the pump electronics low
Symptoms
- MIL, sometimes with a coolant level warning
- Louder pump noise than usual
- Rising electronics temperatures and power limits
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E48
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.