OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E47

Hybrid/EV Electronics Coolant Pump B Underspeed

P2E47 is set when electronics coolant pump B keeps turning but clearly slower than requested. GM's 2018 hybrid tables describe the check for pump A (P19FC): the filtered difference between commanded and reported speed must stay within a calibrated band once the pump has run for 5 s at 11 to 90 % duty, otherwise a Type B fault results. Ford's 2024 summary keeps underspeed (B2) as a fault type of its own, and a Toyota patent for cooling a vehicle drive unit (US20130030643) uses pump speed together with flow and coolant temperature to locate the faulty part. No manufacturer publicly documents P2E47. Unlike a stall (P2E49) the rotor still moves, so bearing friction, impeller deposits, a partial blockage, thick cold coolant or a weak supply are more plausible than a failed motor. Pump A: P2C66.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 47

Possible causes

  • Stiff bearing or worn pump B high
  • Deposits or debris slowing the impeller medium
  • Voltage drop on pump supply or ground under load medium
  • Incorrect or aged coolant, too viscous when cold low

Symptoms

  • MIL and hybrid system warning
  • Electronics temperatures rise during long drives or fast charging
  • Occasional power limitation

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2E47

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication