P2E46
Hybrid/EV Electronics Coolant Pump B Overspeed - Dry Run
P2E46 is the dry-run report of electronics coolant pump B: faster than commanded at lower current, the signature of air at the impeller. Porsche describes such self-monitoring on the traction-battery pump of the 2018 Panamera plug-in hybrid (code P0C4A00 there). On Mercedes 167-series SUVs with the M177 V8 and 48 V, trapped air forces the 15 W low-temperature pump into a protective dry-run state and sets pump A's P2B2A7A with a yellow coolant warning; Mercedes prescribes vacuum filling and repeated venting. For BAE hybrid buses the pump maker EMP warned that filling with the pump at only 20 % speed leaves air at the inlet and ruins the shaft seals. No manufacturer publicly documents P2E46. Bleed the loop and find the leak first. Plain overspeed is P2E48, pump A's dry-run code P2B2A.
Possible causes
- Low coolant level from a leaking hose, joint or component high
- Air left in the loop after service without vacuum fill high
- Pump B damaged by earlier dry running low
Symptoms
- Coolant warning message and MIL
- Pump starts briefly, then stops again
- Gurgling noise or falling level in the electronics reservoir
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E46
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.