OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E41

Hybrid/EV Electronics Coolant Pump B Control Circuit/Open

P2E41 flags an electrical fault on the line over which the controller commands electronics coolant pump B, the second pump serving inverter, DC/DC converter and frequently the charger; the maker decides which pump is B. No manufacturer publicly documents P2E41. GM's 2018 hybrid tables show the logic for the pump A counterpart P0CE9: the controller watches the current on the PWM command line and fails it below 200 mA or above 3 A while active, after 16 failures in 20 samples taken every 250 ms, Type B. Ford's 2024 summary checks the command line of its auxiliary pump B for an open circuit (fault type 13) within 5 s at 11 V or more. Broken wires, corroded pins and pumps with dead input electronics are typical. Audi logged pump A's circuit code on the e-tron alongside low coolant. Low and High are P2E43 and P2E44.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 41

Possible causes

  • Broken or disconnected control wire between module and pump B high
  • Corroded or pushed-back pins at the pump connector medium
  • Pump B electronics no longer load the command line medium
  • Faulty output stage in the controlling module low

Symptoms

  • Hybrid or electric drive warning and MIL
  • Pump B does not run, electronics loop warms up faster
  • Reduced drive power or interrupted charging under high load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E41

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication