OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E3E

Battery Charger B Module Forced Shutdown Voltage Performance

P2E3E is the charger B version of P2E32: the forced shutdown signal of the second charger is electrically in range but its behaviour is implausible. Examples are a shutdown request that the charger ignores, or a level that changes state without a matching command, so the control unit can no longer trust its hardwired off-switch for path B. No manufacturer documents P2E3E or the underlying circuit publicly. What such a line is for can be seen at Watt & Well, whose EVCC controller ends a charging session in hardware as soon as current in its EmShut loop vanishes. CARB demands that plug-in hybrids detect charger faults that prevent or degrade charging. Its low and high faults are P2E3F/P2E40. Expect charger B to be locked out; a first charger may keep charging at reduced power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 3E

Possible causes

  • Shutdown input stage inside charger B not responding correctly medium
  • Intermittent contact in the charger B shutdown line medium
  • Software issue in the module issuing the shutdown low

Symptoms

  • Charging slower than usual because charger B is locked out
  • Charging system warning message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2E3E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication