P2E3C
Battery Charger B Output Current Performance
P2E3C means charger B does not deliver the high-voltage current it has been asked for. No manufacturer documents P2E3C publicly. Its A-side model P0D22 is well covered: the 2011 Volt compares actual and desired current in constant-current mode against a table and sets the code after 150 bad samples in 300, One Trip Type A. Mitsubishi's 2022 Outlander PHEV stops charging if target and actual current differ by 3 A or more for 3 s while the PHEV-ECU permits charging. GM bulletins PIP4884B (2011 Volt, mostly in cold weather) and PIP5077D (2013 Volt) trace a MIL with P0D22 after charging to calibration and order a reflash of the hybrid powertrain control module 2, not a new charger. Voltage faults are P2E3A/P2E3B, a shorted output P2E3D. Charging slows or stops.
Possible causes
- Control software or calibration of charger or hybrid module high
- Weak power stage inside charger B medium
- Inaccurate output current measurement low
Symptoms
- MIL after or during charging
- Charging takes noticeably longer or aborts
- Problem more frequent in cold weather
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E3C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.