P2E3B
Battery Charger B Output Voltage Too Low
P2E3B is set when the high-voltage output of charger B stays below what the control unit expects while charging. No manufacturer documents P2E3B publicly. For the A-side code P0D21, GM's 2016 tables for the Cadillac ELR use a fixed floor: in constant-current as well as constant-voltage mode the charger bus must not drop under 150 V, and 8 failures in 10 samples set the code as Type B. Stellantis stores P0D21-00 in the integrated dual charging module (IDCM) with the MIL on and the car refusing to charge, on the 2021 Wrangler 4xe (TSB 08-260-26, some cars also tripping the house circuit breaker) and the 2022 Pacifica plug-in hybrid (TSB 08-334-26); the fix in both is IDCM software. CARB requires such charger faults to be caught. Imprecise output is P2E3A, a short P2E3D.
Possible causes
- Charger module software fault fixed by reprogramming high
- Failed power stage inside charger B medium
- High resistance in the HV output connection low
Symptoms
- MIL on and vehicle will not charge
- Level 2 charging fails, wall box breaker may trip
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E3B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.