P2E3A
Battery Charger B Output Voltage Performance
P2E3A says the high-voltage output of charger B does not follow its target, typically in the constant-voltage phase near the end of a charge, without being clearly too low. No manufacturer documents P2E3A publicly. The A-side code P0D20 shows two readings of the same check. GM's 2011 Volt sets it in constant-voltage mode once the output deviates by 15 % or more, 30 times in 50 samples at 100 ms, One Trip Type A. Ford's 2019 plug-in hybrid summary files P0D20 when the charger, connected and fed with AC, delivers less output power than expected. Holley's 30-8405 unit specifies an output voltage accuracy of 1 %. CARB covers faults that keep the battery from filling completely. Clearly low output is P2E3B, current deviation P2E3C. Charging may end early or below full.
Possible causes
- Degraded power stage or regulation inside charger B high
- Drifting output voltage measurement medium
- Charger or battery module software needing an update medium
Symptoms
- Battery does not reach full charge
- Charging stops early or takes longer
- Charging system warning message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E3A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.