P2E38
Battery Charger B Enable Circuit Range/Performance
P2E38 flags an enable circuit of charger B that is electrically sound, while the charger or its partner modules do not react to it as expected. No manufacturer documents P2E38 publicly. Ford shows the A-side logic for P0E64 in its 2019 plug-in hybrid OBD summary: once the charger is ready and the wake-up line Chrg_Wkup is high, the battery energy control module must report ready; if it still says not ready after 30 s, the test fails. Slow start-up, a module that does not wake or mismatched software can therefore trigger the code without any wiring fault. GM's 2019 hybrid tables check the hardware side of the line separately (P0E61). CARB asks for rationality checks where feasible. Circuit faults are P2E35 to P2E37, output power deviations P2E3A. Charging may start late or not at all.
Possible causes
- Software mismatch between charger B and battery control module high
- Battery control module not waking or starting too slowly medium
- Enable level marginal due to contact resistance low
Symptoms
- Charging begins only after a long delay or not at all
- Fault appears only on some charging sessions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E38
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.