OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E32

Battery Charger A Module Forced Shutdown Voltage Performance

P2E32 belongs to the forced shutdown input of on-board charger A, a hardwired signal with which another module can switch the charger off regardless of bus messages. The code means this signal does not behave as expected although its level is in range, for instance the charger keeps converting power after a shutdown request, or the line reports shutdown while none was commanded. No manufacturer documents P2E32 or the circuit behind it publicly. Watt & Well's EVCC charging controller offers a comparable supplier example: its hardwired emergency stop halts charging when the loop current drops to zero. CARB obliges plug-in hybrids to detect charger faults that disable or degrade charging. Low and high levels are P2E33/P2E34, charger B's twin is P2E3E. Charging is usually blocked.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 32

Possible causes

  • Contact resistance or partly corroded terminal in the shutdown line medium
  • Shutdown input stage inside charger A not responding correctly medium
  • Fault or software issue in the module driving the shutdown signal low

Symptoms

  • Plug-in charging refused or ended unexpectedly
  • Charging system warning message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2E32

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication