P2E2E
Battery Charger A Module Supply Voltage High
P2E2E reports the opposite of P2E2D: the low-voltage feed of on-board charger A rises above its upper limit. On a plug-in vehicle the 12 V network is held by the DC/DC converter, so a converter regulating too high is the first suspect; an external charger or jump-start device at excessive voltage can do the same, and a faulty measurement inside the charger can fake the reading. Mitsubishi's Outlander PHEV, for comparison, treats charger supply voltages above 16 V as outside its test window for P0D67; P2E2E itself appears in no public manufacturer documentation, threshold included. Under CARB rules, a plug-in hybrid must flag charger faults that prevent or limit charging. Low is P2E2D, implausible P2E2C, system overvoltage P0563. Charging may stop to protect the electronics.
Possible causes
- DC/DC converter regulating the 12 V network too high high
- External battery charger or jump starter with excessive voltage medium
- Faulty voltage measurement inside the charger module low
Symptoms
- Plug-in charging stops or will not start
- Overvoltage faults stored in other modules as well
- Lamps unusually bright or 12 V battery overcharged
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E2E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.