P2E2D
Battery Charger A Module Supply Voltage Low
P2E2D is set when the 12 V feed of the control board in on-board charger A stays below its lower limit. The usual suspects sit outside the charger: a discharged or failing 12 V battery, a DC/DC converter that is not keeping the network up, a blown fuse in the feed, or resistance in supply or ground wiring that eats voltage under load. For orientation, Mitsubishi's Outlander PHEV accepts its charger's supply only between 10 and 16 V before checking the internal rails (P0D67); the limit behind P2E2D is not published, and no manufacturer documents the code. CARB requires plug-in hybrids to catch charger faults that block charging. Too high is P2E2E, implausible P2E2C, low AC input P0D27. The car often still drives, but charging may fail.
Possible causes
- Discharged or aged 12 V battery high
- Blown fuse or failed relay in the charger supply medium
- High resistance in supply or ground wiring medium
- DC/DC converter not maintaining the 12 V network low
Symptoms
- Plug-in charging refused or interrupted
- Further low-voltage faults in other modules
- Charging status display behaves erratically
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2E2D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.