P2E25
Drive Motor A Phase Z Current Sensor Circuit Low
P2E25 means the phase Z current sensor of drive motor A reports below its valid minimum. No manufacturer documents P2E25 publicly. A zero reading is not the same thing: if phase Z carries no current because a lead is open, the sensor correctly reads about zero and the open phase is judged by P2C70. Low here means beyond the negative end of the scale; GM places that limit for its U/V/W sensors between -440 A on eAssist and -800 A on the 2016 Cadillac ELR. When X and Y log low codes as well, a common cause such as the shared sensor reference or a ground in the inverter's low-voltage wiring is more likely than three failed sensors; Ford, for one, watches that reference separately. High side: P2E26.
Possible causes
- Phase Z sensor signal shorted to ground high
- Shared sensor reference or ground faulty medium
- Phase Z current sensor failed medium
Symptoms
- Hybrid warning lamp and MIL
- Reduced electric drive
- Low codes of other phases possibly stored too
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E25
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.