OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E24

Drive Motor A Phase Z Current Sensor Circuit Range/Performance

P2E24 concerns a phase Z current reading of drive motor A that passes the electrical checks yet fails a plausibility test. No manufacturer documents P2E24 publicly. Z completes the second winding group of a two-group motor; in the Mitsubishi Electric patent X, Y and Z are star-connected and controlled separately from U, V and W, so a biased Z sensor upsets only its own group. GM's 2019 hybrid table shows the typical test on the U/V/W side: the offset learned while no motor current flows must stay within 35 A, otherwise the code sets after 0.4 s, Type A. Ford also uses the motor phase sensors to confirm that the three AC leads are connected correctly, so a skewed reading can look like a wiring problem. Circuit: P2E23; low and high: P2E25, P2E26; group sum: P2E27.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 24

Possible causes

  • Zero offset of the phase Z sensor drifted high
  • Gain error of the phase Z sensor medium
  • Faulty measuring stage on the inverter control board low

Symptoms

  • Hybrid warning lamp and MIL
  • Electric drive limited
  • Uneven torque or motor noise

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E24

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication