P2E23
Drive Motor A Phase Z Current Sensor Circuit
P2E23 points to a wiring or circuit defect around the phase Z current sensor of drive motor A that is not classed as low or high. Whether a Z sensor exists at all depends on the design. A Hyundai patent on hybrid motor drives notes that an inverter may carry three sensors or only two, since the three currents of a star winding cancel out and the controller can compute the missing one. A computed phase cannot raise a sensor circuit code, so P2E23 presumes a measured Z, as in the Mitsubishi Electric layout with one sensor each for X, Y and Z. No manufacturer documents P2E23 publicly. The Hyundai text also names loose connectors from vibration, heat and corrosion as typical disturbances of such sensors. Inspect the inverter's low-voltage plug first. Range: P2E24; low and high: P2E25, P2E26.
Possible causes
- Loose or corroded low-voltage connector at the inverter high
- Phase Z current sensor in the inverter failed medium
- Supply or ground of the Z sensor interrupted medium
Symptoms
- Hybrid warning lamp and MIL
- Electric drive limited or switched off
- Fault may come and go with vibration or temperature
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E23
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.