P2E22
Drive Motor A Phase Y Current Sensor Circuit High
P2E22 is stored when the phase Y current sensor signal of drive motor A sticks above its upper limit. No manufacturer documents P2E22 publicly. On GM's 2016 Cadillac ELR the U/V/W counterparts fail above 800 A, judged as 4 bad samples out of 6 at 10.4 ms intervals, Type A. Notably, the V-phase checks only run while no U-phase sensor code is active, and W waits for V in the same way, presumably so that one shared fault does not set a code on every phase. If P2E22 shows up together with high codes of X or Z, look for such a common cause first, for example the sensor reference. On its own, a short between signal and supply line, or a lost sensor ground, is the likely culprit; real overcurrent in phase Y is P2C6E. Mitsubishi Electric's two-group motor patent lists a dedicated Y sensor beside those for X and Z. Low side: P2E21.
Possible causes
- Phase Y signal shorted to the sensor supply high
- Open ground of the phase Y sensor medium
- Shared sensor reference faulty, other phases affected too medium
Symptoms
- Hybrid warning lamp and MIL
- Electric drive switched off or strongly limited
- High codes of other phases stored at the same time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E22
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.