OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E20

Drive Motor A Phase Y Current Sensor Circuit Range/Performance

P2E20 is set when the phase Y current sensor of drive motor A reads within its electrical limits but not believably. No manufacturer documents P2E20 publicly. Besides the zero check, a current balance can expose a sensor with a wrong gain. GM's eAssist table checks whether motor DC current and the input current of the accessory power module match the battery pack current; a mismatch above 40 A in 90 of 96 samples, taken every 2.08 ms, sets the U-V-W correlation code P0BFD as two-trip Type B. While a single sensor code is active, GM skips that balance and runs current control in a mode that does not rely on the sensors. The Mitsubishi Electric patent that defines X/Y/Z windings measures all six phase currents one by one. A drifting sensor or a disturbed reference is likely. X and Z range faults: P2E1C, P2E24.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 20

Possible causes

  • Gain error of the phase Y sensor high
  • Zero offset of the phase Y sensor shifted medium
  • Disturbed reference voltage of the current sensors medium
  • Motor control software needing an update low

Symptoms

  • Hybrid warning lamp and MIL
  • Less electric assist, torque not as requested
  • Motor whine or slight vibration

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E20

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication