P2E1F
Drive Motor A Phase Y Current Sensor Circuit
P2E1F stands for a circuit fault of the phase Y current sensor of drive motor A that is not sorted into a low or high case. No manufacturer documents P2E1F publicly, and even the U/V/W equivalents of this general code see little use: GM's 2013 to 2019 hybrid tables cover the phase sensors with offset, low, high and sum checks only, while Ford's 2019 hybrid summary says that current sensor faults of its motor inverter end up in the phase current codes P0A5D, P0A60 and P0A63 or in P0BFD. Which code a car stores for the same defect thus depends on the maker. Y is the middle phase of the second winding group; a Mitsubishi Electric patent gives each of X, Y and Z its own sensor. Check the inverter's low-voltage connector and supply first. Range check: P2E20; low and high: P2E21, P2E22.
Possible causes
- Phase Y current sensor in the inverter failed high
- Poor contact at the inverter's low-voltage connector medium
- Sensor supply or ground interrupted medium
Symptoms
- Hybrid warning lamp and MIL
- Electric drive limited or switched off
- Other phase current codes may be stored as well
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E1F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.