OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E1C

Drive Motor A Phase X Current Sensor Circuit Range/Performance

P2E1C means the phase X current sensor of drive motor A delivers a value that is electrically valid but implausible. No manufacturer documents P2E1C publicly; GM's U/V/W counterparts show the usual test, a zero check. While no current flows through the motor, the controller learns each sensor's offset: the 2016 Volt fails it above 30 A after 0.1 s, the Cadillac ELR in the same 2016 tables above 30 A within about 83 ms, a 2019 table above 35 A after 0.4 s, always Type A with MIL after one trip. A shifted zero distorts torque control and the phase balance. CARB wants rationality faults kept in a code of their own, apart from circuit and range faults (P2E1B, P2E1D, P2E1E). The X/Y/Z set only exists on motors with a second winding group. Sensor drift, heat damage or a weak reference are likely.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 1C

Possible causes

  • Zero offset of the phase X sensor has drifted high
  • Sensor gain error after ageing or overheating medium
  • Unstable reference voltage for the current sensors medium
  • Fault in the measuring stage of the inverter control board low

Symptoms

  • Hybrid warning lamp and MIL
  • Electric drive limited, uneven torque at low speed
  • Code returns after clearing at the next start

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E1C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication