P2E0F
Gear Lever Position Sensor D Circuit High
P2E0F closes the series: sensor D, the fourth gear lever position sensor, reads above the top of its valid range. An open signal wire where the module input pulls up, contact with a voltage-carrying wire or a lost sensor ground produce this picture. No manufacturer documents P2E0F, nor the role of sensor D in a real selector. In the four-Hall-sensor arrangement of Toyota's patent US10180184 a high fault of one element leaves three sensors to determine the position, and the module watches them for a reading that would mean the opposite direction of travel. GM's two-sensor lever detects high faults per axis above 95 % duty cycle (P082F, P08A2). P2E0E is the low counterpart and P2E0B the high fault of sensor C. CARB 1968.2 (e)(15) calls for such range checks.
Possible causes
- Signal wire of sensor D open high
- Ground of sensor D lost medium
- Signal wire touching a voltage-carrying wire low
Symptoms
- Warning lamp or shift message
- Normal shifting on the remaining sensors
- Neutral fail-safe after a further fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E0F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.