P2E0C
Gear Lever Position Sensor D Circuit
Sensor D is the fourth and last letter in this family of gear lever position sensors. A layout that needs four is described in Toyota's patent US10180184: four Hall sensors lined up along the shift direction under one magnet, whose voltage pattern flips when the lever moves sideways, so both shift and select movement can be read. P2E0C covers a general electrical fault of sensor D – interrupted wiring, no supply, signal not evaluable – without saying whether it is too low or too high (those are P2E0E and P2E0F). No manufacturer documents P2E0C, and none says which part of the lever D is assigned to. Circuit checks on transmission inputs are mandatory under CARB 1968.2 (e)(15). If only D is lost, a four-sensor design can still recognise the position.
Possible causes
- Selector connector or wiring of sensor D faulty high
- Sensor D failed medium
- Module input for sensor D faulty low
Symptoms
- Warning lamp or shift-system message
- Gear selection usually still works
- Neutral fail-safe possible after a second sensor fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E0C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.