OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E09

Gear Lever Position Sensor C Range/Performance

P2E09 means sensor C produces an electrically valid signal that contradicts the lever position given by the other sensors. No manufacturer documents this code or names the role of a sensor C, so the logic can only be inferred from the component. In Toyota's four-Hall-sensor selector patent (US10180184) a sensor counts as abnormal when the difference between its voltage and those of its neighbours leaves a preset tolerance. The patent also explains a weak spot: a sensor frozen at a mid value is hard to spot until the driver moves the lever to a particular position. CARB 1968.2 (e)(15) asks for such rationality checks on transmission inputs under a code separate from circuit faults. Sensors A and B have the same check as P2E01 and P2E05, which Lexus and GM use.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 09

Possible causes

  • Sensor C output frozen at an intermediate value high
  • Magnet or lever mechanism worn or displaced medium
  • Plausibility logic of the selector software too strict low

Symptoms

  • Warning appears only after certain lever movements
  • Range display briefly disagrees with lever position
  • Limp-home with restricted selection possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E09

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication