P2E08
Gear Lever Position Sensor C Circuit
A third gear lever position sensor, C, only exists on selectors with more than the usual redundant pair. Toyota's patent US10180184 shows such a design: four Hall sensors in a row face a magnet in the shift lever, the voltages they produce encode the position, and if any one of them is faulty the other three still allow limp-home driving. Which job the letter C has in a given vehicle is not published; no manufacturer documents P2E08 or any other sensor C code. P2E08 is the general circuit fault of that sensor – open wiring, missing supply or an unreadable signal – before any low/high split (P2E0A, P2E0B). CARB 1968.2 (e)(15) requires the module to detect circuit faults of such transmission inputs. GM's lever tables only know sensors 1 and 2.
Possible causes
- Connector or wiring at the selector assembly faulty high
- Sensor C inside the selector failed medium
- Evaluating module input faulty low
Symptoms
- Warning lamp or shift-system message
- Shifting continues on the remaining sensors
- A further sensor fault may force neutral
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E08
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.