P2E07
Gear Lever Position Sensor B Circuit High
P2E07 is the high-side circuit fault of gear lever position sensor B: its signal reads above anything the sensor may legitimately produce. An interrupted signal line on an input with pull-up, a short to battery or reference voltage, or a broken sensor ground are the classic causes. No maker publishes P2E07. On the Cadillac XT4 electronic shifter GM monitors sensor 2 axis by axis and sets P089D or P08A2 above 95 % duty cycle, 3 out of 4 samples on a 25 ms loop, Type B. Sensor A carries the selector meanwhile, which is the purpose of the redundancy described in GM's patent. P2E06 is the low fault of the same sensor and P2E03 the high fault of sensor A; both A and B high at once suggests a shared ground or connector.
Possible causes
- Signal line of sensor B open high
- Ground of sensor B broken medium
- Signal line shorted to battery or reference voltage low
Symptoms
- Warning lamp and shift-system message
- Normal shifting via sensor A
- With P2E03 present as well, range selection may be blocked
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E07
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.