OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E05

Gear Lever Position Sensor B Range/Performance

P2E05 flags implausible data from sensor B, the backup gear lever sensor. It is one of the few codes of this family with public manufacturer use. On 2022–24 Lexus NX 250/350 and 2022 NX 350h/450h+, Toyota stores it as P2E04-64, a plausibility failure of sensor B, often alongside P2E01; bulletin L-SB-0050-22 (revised October 2023) changes the floor shift assembly logic by reflash, with 0.8 h labour and no part swap. In GM's 2025 ECM tables (25OBDG04B) P2E05 belongs to gear lever position sensor 2: an internal error reported over the second SENT channel, threshold 99.84 %, 160 failures in 200 samples, blocked by lost-communication codes U1194, U1196, U13E1 and U13E3; Type B, two trips. Axis checks of that sensor are P089B and P08A0.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 05

Possible causes

  • Floor shift assembly logic outdated (Lexus NX bulletin L-SB-0050-22) high
  • Sensor B signals an internal error medium
  • Sensor B or its magnet misaligned after a repair in the console low

Symptoms

  • MIL on, usually without a driveability change
  • Shift-system warning may appear and disappear
  • Often stored together with P2E01

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication