P2E01
Gear Lever Position Sensor A Range/Performance
Here sensor A of the gear lever delivers values that are electrically valid but not believable. Two makers document the code. Lexus lists it as a signal plausibility failure (internal code P2E00-64) on 2022–24 NX models; bulletin L-SB-0050-22 cures it, together with P2E05, by reflashing the floor shift unit with revised logic, expressly without replacing it. GM's 2025 ECM tables (25OBDG04B) name it gear lever position sensor 1 performance: the sensor flags an internal error inside its SENT data, seen as alpha/beta at or above 99.84 %, in 160 of 200 samples and only while no communication fault is stored; Type B, MIL after two trips. GM checks the X and Y axes of the same sensor separately under P082A and P082D. Per GM's patent the partner sensor can take over.
Possible causes
- Selector logic needs a software update (Lexus NX 2022–24) high
- Sensor A reports an internal error medium
- Magnet or lever mechanism shifted, so sensor A reads off the gate low
Symptoms
- MIL on after two trips
- Shift-system message, selector still works through sensor B
- Often no noticeable driving difference
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E01
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.