P2DFD
EVAP System Purge Pump Performance
Some turbocharged and hybrid engines cannot count on intake vacuum to empty the charcoal canister, so an electric purge pump moves the fuel vapour into the intake. P2DFD means this pump does not achieve the expected effect, for instance the pressure or speed it should reach. Nissan uses the code on the 2022 Rogue with the KR15DDT engine: bulletin NTB22-066 has the technician reseat the pump connector under the intake tube and run the engine for a minute before any further diagnosis. Hyundai names P2DFD00 among the codes linked to EGR condensation and intake icing on Tucson and Santa Fe hybrids, addressed by an ECM update (26-01-081H), and keeps its own code P1DFD00 for pump target speed. A Continental patent uses a pressure sensor in the pump module for plausibility checks. CARB demands purge flow monitoring.
Possible causes
- Pump connector not fully latched (Nissan Rogue 2022) high
- Purge pump motor or impeller worn, pump no longer reaches its speed or pressure medium
- Purge hose cracked, disconnected or blocked between canister, pump and intake medium
- Condensation or ice in the intake path, needs ECM update (Hyundai hybrids) low
Symptoms
- MIL on, usually without noticeable change in driving
- EVAP readiness not complete, emissions inspection may fail
- Occasional fuel smell when the canister is not purged
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2DFD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.