P2DFA
Coolant Pump E Supply Voltage Circuit
Unlike P2DF4 to P2DF6, which concern the command line, P2DFA concerns the power feed of coolant pump E. Smart pumps measure the voltage at their own supply pin and report when it leaves the window they need to run reliably. No manufacturer documents P2DFA publicly. Ford codes a feed outside its permitted band as fault type 1C for its two auxiliary pumps (2024 gasoline summary), judged over 5 seconds once 11 V are present. Bosch rates its PDE pumps for the 12 V network with integrated electronics and selective error feedback to the vehicle. Suspects are a blown fuse, a relay with worn contacts, a loose ground, corroded terminals or a weak battery; a voltage-drop test with the pump running reveals hidden resistance. The pump may stop or run reduced, so the served circuit is undercooled.
Possible causes
- Blown fuse or relay with burnt contacts in the pump feed high
- Loose or corroded ground of the pump medium
- Weak 12 V battery or charging fault medium
- Resistance in feed wire or connector low
Symptoms
- Warning lamp on
- Pump stops intermittently, often with other low-voltage faults
- Reduced cooling of the served component
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2DFA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.