OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DF9

Coolant Pump E Stuck/Stalled

P2DF9 covers the hard case: coolant pump E is powered and commanded, but its rotor does not start or comes to a standstill. Brushless pumps sense this internally, for instance from current flowing without commutation feedback, and pass the result to the commanding module. No manufacturer documents P2DF9 publicly. In Ford's 2024 gasoline document the matching entry for pumps A and B is fault type 71, a stuck actuator, watched without interruption from 11 V. A GM patent on electric coolant pump diagnostics compares measured pump current with a value expected from speed, coolant temperature and valve positions, and flags a flow fault when either current or speed deviates too far. Seized bearings, a jammed impeller, frozen or sludged coolant and a burnt winding are typical. Slow but turning is P2DF8.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / F9

Possible causes

  • Seized bearing or impeller jammed by debris high
  • Frozen, gelled or sludged coolant (wrong mixture) medium
  • Burnt winding or failed pump electronics medium
  • Rotor stuck after long standstill, deposits on the bearing low

Symptoms

  • Warning lamp on
  • No coolant flow in the affected circuit
  • Overheating warning or power limitation

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2DF9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication