P2DF2
Intake Valve Lift System Range/Performance
P2DF2 points to the intake valve lift system as a whole rather than to one cylinder or bank, typical for inline engines where one actuator sets lift for every cylinder, as on four-cylinder Valvetronic engines; Toyota's Valvematic also varies lift continuously. Plausibility is usually judged on air flow: a Bosch patent derives the expected flow from lift and engine speed, compares it with the air mass meter and falls back to a throttle-based model once the valves sit at full lift and the engine runs conventionally. Toyota's campaign F0N updated the software of about 20,200 Corolla Eco cars of 2014 (2ZR-FAE) whose continuous lift control could light the engine lamp and cut power. No manufacturer documents P2DF2 publicly by number; CARB makes such lift monitoring mandatory. Bank-specific faults use P2DF0 or P2DF1.
Possible causes
- Lift actuator motor or its gear worn high
- Engine control software needing an update (known on some models) medium
- Eccentric or control shaft stiff from wear or sludge medium
- Faulty air mass reading or intake leak falsifying the plausibility check low
Symptoms
- Check engine light on
- Noticeably reduced power, engine in substitute mode
- Rough idle and higher fuel consumption
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DF2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.