P2DF0
Intake Valve Lift Range/Performance Bank 1
P2DF0 means that intake valve lift on bank 1 as a whole does not follow the command, rather than one cylinder. Continuously variable systems explain why: BMW's Valvetronic turns an eccentric shaft with an electric motor controlled by the DME, moving an intermediate arm between camshaft and rocker, while Nissan's VVEL uses a DC motor to rotate a control shaft; one shaft sets lift for all cylinders it serves, so a stiff shaft, worn motor or wrong position reading hits them together. A Bosch patent checks lift plausibility by comparing the air flow predicted from valve lift and engine speed, plus a tolerance, with the air mass meter. No manufacturer documents P2DF0 publicly; CARB requires checks for both wrong and late lift. Bank 2 is P2DF1, the whole system P2DF2.
Possible causes
- Eccentric or control shaft on bank 1 stiff from wear or sludge high
- Lift adjusting motor of bank 1 worn or weak medium
- Shaft position sensor reading offset or loosened medium
- Air mass meter error or intake leak making the lift appear wrong low
Symptoms
- Check engine light on
- Reduced power, engine may fall back to throttle control
- Rough idle across several cylinders
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DF0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.