P2DEF
Cylinder 6 Intake Valve Lift Range/Performance
P2DEF covers cylinder 6, typically on a V6 or straight six: its intake valves do not reach the commanded lift or take too long to switch. Detection follows the same idea as for the other cylinders; for the driver the reaction matters more. GM's patent on stuck lift mechanisms reports which cylinder failed and whether it hangs in high or low lift, and the engine computer may then drive every mechanism into one default lift, stop further switching, limit engine speed and turn on the MIL. When several cylinders on one bank or the whole engine are off target, P2DF0, P2DF1 or P2DF2 are the matching codes instead. No manufacturer documents P2DEF publicly; CARB treats any lift error that raises emissions as an OBD fault.
Possible causes
- Lift mechanism of cylinder 6 stuck in high or low lift high
- Restricted oil feed to the cylinder 6 element medium
- Actuator for cylinder 6 slow despite correct wiring low
Symptoms
- Check engine light on
- Engine speed limited or lift switching disabled (substitute mode)
- Cylinder 6 misfire, rough running
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DEF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.