OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DEE

Cylinder 5 Intake Valve Lift Range/Performance

P2DEE can only occur on engines with five or more cylinders and means the intake valve lift of cylinder 5 is outside the commanded range or late. Two-step lift reached V6 engines such as the 3.6 L Pentastar, which FCA updated for 2016. An FCA patent built around switchable roller finger followers, each with an oil control valve, detects a valve stuck in the wrong lift mode from the ripple of camshaft speed taken from the cam position sensor: a filtered amplitude minus a stored nominal value, squared, gives a stuck-valve index that is checked against a threshold within about two engine cycles. Whether a given make stores such a fault as P2DEE is not published. Expect a cylinder 5 misfire, rough idle and the lamp.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / EE

Possible causes

  • Switching roller finger follower of cylinder 5 stuck in one mode high
  • Oil control valve for the lift switching sticking or contaminated medium
  • Oil pressure too low to move the lock pins medium

Symptoms

  • Check engine light on
  • Misfire on cylinder 5
  • Ticking from the valvetrain on one bank

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DEE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication