P2DED
Cylinder 4 Intake Valve Lift Range/Performance
P2DED is the cylinder 4 member of the per-cylinder lift checks: the engine computer finds this cylinder's lift off target or slow to follow. On four-cylinder engines with hydraulic lift control the oil comes first. FCA's tech tip for the 2.4 L Tigershark MultiAir asks the technician to exclude a low oil level, a filter or viscosity outside spec, old or diluted oil and a clogged screen in the oil gallery on top of the block, which feeds the MultiAir unit, before any actuator is replaced. FCA itself stores MultiAir faults under its own P1xxx numbers; P2DED is not documented publicly by any maker. Since MultiAir throttles the intake through the valves, a sticking cylinder 4 shows up as uneven idle, misfire or weaker pull. CARB counts such lift errors as emission faults.
Possible causes
- Low, aged, diluted or wrong-viscosity oil high
- Clogged oil screen in the gallery feeding the lift unit medium
- Oil filter not meeting the maker's specification medium
- Worn cylinder 4 section of the lift actuator low
Symptoms
- Check engine light on
- Misfire on cylinder 4, rough idle
- Hesitation when accelerating
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DED
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.