OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DEC

Cylinder 3 Intake Valve Lift Range/Performance

P2DEC applies only to cylinder 3: the lift its intake valves actually achieve is outside the commanded window or arrives too late. Under the CARB rule, a maker must run a failure analysis of any plausible hydraulic or mechanical defect, naming broken return springs, blocked oil passages and a single cylinder's lift pin as examples, and must catch the resulting errors before tailpipe emissions pass the threshold. Two-step valvetrains with fixed states get a relief: they only have to detect faults that actually exceed it. Because a cylinder stuck in the wrong lift fills differently from its neighbours, its combustion becomes unsteady, which is exactly what crank-speed methods like GM's patented one measure. No public manufacturer document names P2DEC; an open or shorted actuator would set a circuit code instead.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / EC

Possible causes

  • Lock pin or switching follower of cylinder 3 not latching high
  • Partly blocked oil passage to the cylinder 3 element medium
  • Broken return spring in the lift mechanism low

Symptoms

  • Check engine light on
  • Uneven idle, often with a cylinder 3 misfire entry
  • Higher fuel consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DEC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication