P2DEA
Cylinder 1 Intake Valve Lift Range/Performance
P2DEA says the intake valves of cylinder 1 do not reach the lift the engine computer asks for, or get there too slowly. It is the first of a row of per-cylinder lift checks. CARB's rule for valve timing and lift systems demands that such systems be watched for missing the commanded position and for reacting too slowly, and explicitly lists one cylinder's lift pin failing to move as a case the failure analysis must cover. A GM patent shows how such a single-cylinder fault can be found without extra sensors: crank speed yields each cylinder's indicated mean effective pressure, and if its coefficient of variation does not shift by roughly 5 percent after a commanded lift change, that cylinder is flagged as stuck in high or low lift. No manufacturer documents P2DEA publicly. Expect rough running, a cylinder 1 misfire and the lamp.
Possible causes
- Switching element or hydraulic link of cylinder 1 sticking (sludge, wear) high
- Low oil level, wrong oil or restricted oil feed to the lift actuator medium
- Cylinder 1 lift solenoid sluggish though electrically intact medium
- Damaged cam follower, valve spring or lifter on cylinder 1 low
Symptoms
- Check engine light on
- Rough idle or shaking at low load
- Misfire code for cylinder 1 at the same time
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.