OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DE5

Drive Motor A Clutch Stuck Disengaged

P2DE5 is the reverse of P2DE4: the module commands the clutch of drive motor A to close, yet the motor stays uncoupled from the wheels. The motor may spin up without the axle following, or the position signal never reaches the engaged state. No manufacturer documents P2DE5 publicly. With a dog clutch the classic cause is tooth-on-tooth contact: a BorgWarner patent notes that a motor-driven actuator alone cannot tell whether the sleeve reached its end stop or is blocked by the splines, which is why a position sensor or current evaluation is added. GM's Corvette E-Ray front unit lists the disconnect clutch actuator and its switch as separately serviceable parts. The axle then lacks electric drive: no electric launch, no all-wheel traction from that motor and little or no recuperation through it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / E5

Possible causes

  • Actuator motor or solenoid fails to push the clutch into engagement high
  • Clutch teeth blocking on each other, speed synchronisation not reached medium
  • Position switch or sensor stuck at disengaged medium
  • Worn or broken internal parts of the clutch or fork low

Symptoms

  • Warning lamp, hybrid or all-wheel-drive fault message
  • No electric drive or reduced traction from the affected axle
  • Combustion engine starts more often, reduced recuperation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2DE5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication