P2DE3
Cold Start Fuel Injection Quantity D Higher Than Expected
P2DE3 is the excess counterpart of P2DE2: during the cold-start strategy path D injected more than commanded. Nobody publishes this exact code, and the big diesel makers show why it is rare: GM's 2025 diesels judge fuel quantity in the SCR warm-up mode with the ordinary A codes P026C/P026D, keeping only rail pressure (P2C1F, more than 16 MPa below target) and injection timing (P05EC) as separate cold-start codes; Ford's 6.7 litre diesel files cold-start fuel balance errors under the cylinder codes. CARB only demands a response check of commanded quantity during cold start from 2026 on. A dripping injector, a stuck pressure regulator or a coolant sensor reading too cold suggest themselves; expect white smoke and fuel smell. P2DDF is the warm case.
Possible causes
- Injector of group D dripping high
- Pressure regulator sticking, rail pressure too high when cold medium
- Coolant temperature sensor reading too cold medium
Symptoms
- Check engine light on after a cold start
- White smoke and fuel smell when cold
- Rising oil level over time
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DE3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.