OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DE2

Cold Start Fuel Injection Quantity D Lower Than Expected

P2DE2 reports that path D fell short of its fuel request during the cold-start strategy. On petrol direct-injection engines this phase is short and precise: GM's 2025 tables run catalyst heating with a split injection only while the catalyst is under 550 °C, coolant between -12 and 66 °C and the engine has run less than 20 seconds, and they check missing pulses separately under P2B95. CARB section 1968.2 (e)(11.2.4) lists split or multiple injections among the features that must respond during the strategy. A pulse that opens but delivers too little, from deposits on the injector tip or a high-pressure pump slow to build pressure, would fit P2DE2. No manufacturer documents the code; P2DDE is the warm version.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / E2

Possible causes

  • Deposits on injector tips of group D medium
  • High-pressure pump slow to build pressure after start medium
  • Low-pressure supply weak when cold low

Symptoms

  • Check engine light on after a cold start
  • Rough idle in the first seconds after a cold start
  • Often nothing noticeable once warm

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DE2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication