OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DE1

Cold Start Fuel Injection Quantity C Higher Than Expected

P2DE1 is the only code of this family with public manufacturer use. Honda names it Cold Start Air Fuel Ratio Control System Rich: during the cold-start emission strategy the PCM checks whether the mixture measured by the LAF (wide-band) sensor is richer than commanded. Bulletin 22-009 for the 2021 Accord Hybrid says the LAF sensor may misjudge the mixture as rich under certain fuel and shutdown conditions; bulletin 23-100 for the 2021-22 HR-V blames a PCM miscalculation. Both cure it with new PGM-FI software and light the MIL. Version 2 of 23-100 also has the oil level checked after a warm-up and the oil changed if above the upper mark. Real causes besides software are leaking injectors and faulty air or coolant temperature signals.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / E1

Possible causes

  • PCM software (Honda bulletins 22-009, 23-100) high
  • Injector leaking, extra fuel during cold start medium
  • Coolant temperature or airflow signal wrong medium
  • Air-fuel ratio (LAF) sensor faulty low

Symptoms

  • Check engine light on after a cold start
  • Usually no noticeable driving problem
  • Oil level above the upper mark possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2DE1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication