P2DDE
Fuel Injection Quantity D Lower Than Expected
P2DDE covers a fourth injection path, D, delivering too little fuel. The letter is assigned by the manufacturer; no one documents this code openly. CARB section 1968.2 (f)(4.2.2) sets two ways to catch it: either the shortfall is detected before emissions pass the malfunction threshold, or, where no injection fault can push emissions that high, once the control has used up its range and the commanded quantity cannot be reached. Since 2013 the monitor must also count how often it runs. Ford's diesels turn the global version of this finding into a lean code, P0171, below a fueling error of -0.15. Look first at the injectors of group D, then at fuel supply and the air and lambda signals. P2DDF is too much in D.
Possible causes
- Injectors of group D blocked or worn high
- Fuel supply weak (pump, filter, rail pressure) medium
- Air mass or lambda signal inaccurate medium
Symptoms
- Check engine light on
- Lack of power
- Occasional stumbling or misfire-like running
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DDE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.